7 points to Get to Know UV Coating Machine

The UV coating machine is small equipment manufactured for the digital printing, color and short run printing. It can coating on the surface of photo, plastic, coated paper/ art paper, gold leaf, silver leaf, PVC, PET, canvas, compact disc, gum stock and so on, and the result is waterproof, defend oil smooth, wear-resisting, beautiful in color. It is used for full coating to enhance their quality and give beautiful feeling.

For printing, carton enterprises, selecting UV coating machine with excellent structure, stable performance, easy operation, high production efficiency and energy saving is of important significance. Therefore, the correct knowledge and understanding of the structure and features of the polishing equipment is essential to improve production efficiency and product quality.

Coating Machine Operation Manuals

1. Open the carton and take out the machine, put the machine on the level desk, then set up the four rubber foots from the white pocket on the bottom of machine , the other four on the small paper stock.

2. Open the upper cover of the machine; snip the cable tie to make the belt in parallel statement, then the machine can normally operate very well.

3. Pour UV Liquid into the box, liquid depth not exceed 1.5cm. Push the box under the rollers, and then put the pipe in the box.

4. Get through the power line; turn on the three switches (right for power、middle for UV light、left for circulate pump of liquid). The ray of UV light change from dark to bright, it will takes around 3 minutes, and the UV liquid should flow the rollers fully, after that you can coating now.

5. First time to use the machine, there is any atmosphere in the pump, so you may find there is no UV liquid overflow after the machine work 3-5 minutes. At this moment, you just need to use a syringe to suction air from the outer tube.

6. Put the photo or any other materials which you want to coat between the stock, notice, the coating side is up，then push the photo under the rollers, the photo coated will come out from the back of the machine, so you have finish the coating.

7. If you fell the liquid on the material coated is too thin or too thick, you can adjust the gap between the rubber rollers on the base of your need. First, open the small cover above the rollers, you can see two pieces of aluminum which are in front and both ends of the rollers, it is controlled by screw. Second, use the socket head wrench and adjust clockwise, the gap between the rollers could get small, coating thin; adjust anticlockwise, gap get large, coating thick.

Mini Excavator is Most Popular in Construction Machinery Industry

Track excavator is a kind of earth moving machinery which uses its bucket to dig materials higher or lower than the machine surface, and load them into a transport vehicle or unload to the stock yard. The track excavator is one of the most important engineering construction machinery, and is widely used in the excavation of buildings and plant basis, stope, quarry, tunnel, underground powerhouse and so on.

We have seen from the first half year annual report of 2012 that most construction machinery listed companies have suffered a serious cash flow problem, and accounts receivable are difficult to be recycled, so that these enterprises are in face of serious operational problems, but it can not be denied that the development of construction machine industry has the largest influence on China’s economy, and it is the main force in the industrial chain which can not be ignored.

In the construction machine industry, the second-hand mini excavator machine is the most popular product, and it is warmly welcomed in domestic market with broad market prospects. Apart from this, shrinking boom forklift, skid steer loaders and other small construction machinery will have greater development in the market. But so far, spare parts of small construction machines such as pumps, valves, hydraulic fittings substantially are largely depending on import, and it can be said that in the domestic construction machinery market, mini excavators should be a priority for all.

Currently, small construction machinery like compact wheel loaders, backhoe loader backhoe, skid steer loaders, telescopic handler, as well as hydrostatic transmission models needed by small tonnage forklift are all largely dependent on import. But from the overall development and current situation of China's construction equipment, experts believe that we should take mini excavators and other small construction machinery kit as a sally port to promote the overall development of spare parts industry of China's construction machinery; enterprises of mini excavators should reach a consensus that when exploring domestic market, they should also do market research instead of just blindly squeezing the limited resources of the market, in order to form an orderly and sustainable sales model of domestic market.

For the sake of healthy development of the construction machinery industry, enterprises should actively make preparation for the transition of development pattern, and make adjustment and upgrade in technology, products, sale model and management channel, so as to cater to the domestic market of small excavators.

The Sales Data of Track Excavator in August: Demand is still light

It is reported that in August the total sales of track excavator industry is approximately 5,737 units, a year-on-year decline of 29%, it is below market forecasts. Compared to the past five years, sales in August shows a sequential fall of 6%, which is significantly lower than the average number of 3%.

Although infrastructure investment which is represented by a rail industry shows an increasing growth rate in August, due to limited recovery rate of bank credit and the downstream of the digging machine, the market demand shows obvious characteristics of the off-season, and the industry recovery point is further delayed.

Japanese brands generally have larger decline

Among the domestic brands, Sany still lead the industry, its monthly sales is 552 units, a year-on-year decline of 33.4%. Liugong, Xiagong respectively to achieve sales of 279 units and 123 units in single month, a drop of 34.4% and 49%; the performance of Sunward is quite satisfactory, it monthly sold 210 units, a decline of 21.1%; Lonking relatively has good performance, single-month sales is 242 units, showing a year-on-year positive growth of 14.2%; in support of large orders, Vanda continues to keep high growth since the beginning of the year, to achieve a positive growth of 157.4% on a low base. 

Major foreign brands such as Komatsu, Hitachi and other Japanese brands all have a larger decline, in a single month sold 390 units and 295 units respectively, showing a year on year decline of 47.3% and 54.2%. Kobelco performed better and achieved monthly sales of 446 units, a year-on-year decline of 11.7%; Doosan completed monthly sales of 383 units, down 35.3%; Caterpillar’s performance is relative prominence, the single-month sales is 519 units, only dropped by 1.5% year-on-year.

The proportion of small tonnage continues to rise, while large tonnage slides obviously

The product structure pattern of "strong at both ends and weak in middle" since the beginning of the year has changed, and those small models under 13 tons only have a year-on-year decline of 16.6% in August, still being the best performance of all types of products. We believe that after the peak period of investment in infrastructure, small excavators will maintain the momentum of the increasing application in the emerging field of investment in irrigation, municipal construction, road maintenance in a longer period of time, which is in accordance with development trajectory of Japan and other developed countries. 

The large tonnage excavators (30 tons and above), however, have a year-on-year decline of approximately 56.2%, and the drop is continue to expand than the previous month. Medium excavators are mainly used in the construction of large-scale infrastructure (13 tons -30 tons) shows a year-on-year decline of 29.4%.

Little Track Bolt Enhances Safety for Your Traveling

Track bolt is a standard part designed for railway construction and maintenance. The grades of railway track bolts include 8.8 grade and 10.9 grade. The surface is galvanized and is corrosion resistance. Although the track bolt is small in size, its importance can not be overlooked.

Let me tell you a story. Many years ago, for a period of time the train derailment events occurred several times, when surveying the reasons, people all feel don’t know whether to laugh or cry. Take the second phase of Daqin railway which bears the task of transporting coals in Shanxi to other places for example, a truck derail accident happened and caused total loss of 5 million yuan. Why did this happen? The reason is that the track bolt in a certain place was removed and stolen, which make the two sections of rails linking fail to link tightly. Fantastic! What are these track bolts sold for？Just because they can exchange for some pork! A little pork, compared with and a truck, or even people’s life, their importance is obvious, it’s hard for us to accept the fact that a demand for some pork causes such tragedy. Regardless of other people’s life security and to seek such petty gain, it is foolish and selfish! And there must be strict laws and punishes waiting ahead, the loss outweighs the gain.

From the above statement, you may have an in-depth feeling that how important a track bolt is, and hope every can learn from this to avoid similar things in the future, ensuring our safety on the journey.

An automatic track bolt machine is consists of total power supply system, high pressure oil system, horizontal steering and suspension para institutions, torque output mechanism, automatic travel agencies, descaling rust removal mechanism, frame and emergency road institutions, microcomputer control system, etc. Its features include: above suspension para institutions of elevating the drive, lifting drive and positioning control of three parts constitute device

Automatic track bolt workover is helpful in improving the service life of the lifting mechanism and performance stability, and can work for long hours under bad environment and climate, which reduces the cost at the same time; ensure the composite bolt sleeve in rotary orbit nut, composite bolt sleeve of nut can completely from, no card in a composite bolt sleeve which influence the next step work; High pressure oil supply device Settings from the open torque output mechanism, greatly reduces the composite bolt sleeve great impact and vibration effects, improve the high pressure oil supply device using life and effect.