Introduction of Three Kinds of Gasket Machine

Following are the several kinds of gasket machine the buyer usually want to search for manufacturers. I compiled it for reference.
Handle common  gaskets
Handle common gaskets made of steel graphite, rubber, non-asbestos,etc with high precision and efficiency.
Configuration Oscillating blade, pen, creasing wheel, drag knife
Function It is used in carton&paper box packaging factory. it can cut and crease
15mm corrugated paper.
Max speed: 1350mm/s
Smallest cutting: diameter 6mm
Maximum cutting: thickness 15mm
Control line and driver Servo: Precision ≤0.1mm   vacuum 5.5kw
Data form HPGL: Voltage 220v±10% 50Hz
Data port Serial port, parallel port, USB port(extra tieline available)
Data Transmission  speed 10MB/S
Input cushion area 32MB
Color teflon ptfe gasketMain Features:
1.Heat resistance property---It is able to wok stably between -180°C to +260°C.
2.Excellent non-sticky property---It easier to remove those resin, dopes, oil and other sticky things.
3.Good mechanical property with no distortion and low friction coefficient.
4.Excellent insulation property.
5.Colorful ptfe gasket available

Specifications
PTFE Spacer / Gasket to be machined by moulded tubes
Sizes, Specifications and color can be according to customer's drawing or requirements
1- used at dynamic sealing and static sealing location for particle crystal medium
2- super high strength
Application Media: chemicals, solvents, corrosives, gases, water, steam, ammonia, air, oils, paper stock, liquor
corrugated gasket machine
This machine which adopts new craft is the non-standard special equipment for producing the compound gasket with serrated face and mental camprofile gasket. It is used specially for producing the nook and convex corner of the compound gasket with serrated face and metal camprofile gasket. In the past, we just install some accessories to the ordinary lathe to produce above gaskets .This old method costs both time and materials and the utilization of the materials is very low. When we produce the gaskets with larger diameter, only the large vertical lathe we can use for producing them. In addition, producing process with ordinary lathe is very difficult and the cost is very high. Our machine can reduce the producing cost of the compound gasket with serrated face and metal camprofile gasket.

Voltage:380V50HZ
Electromotor with adjustable speed:0.75KW0~1320 rpm
Cylinder diameter:￠40mm
Cylinder travel:100mm
Driving axle wheel:￠100mm
Thickness of the ring:3mm
Producing scope:aboveDN300
In addition: You can produce the serrated metal ring of 2mm thickness and 5mm thickness if replace some accessories of the machine.