Factors need to care when selecting CNC cutting machine

People have a common sense that the use of CNC machine can produce high precision and efficiency products. However, CNC flame or plasma cutting machine are not the case. Because the width of the cutting nozzle affected by cut mouth and other factors, no matter how high accuracy is the device itself, the precision error of the parts cut by cutting machines is ± 0.5mm, which are several magnitudes higher than the equipment itself. The numerical control cutting machine imported by heavily spending millions of money can only be the case.

Cutting efficiency has no direct relationship with the device itself. Of course, CNC cutting machine still reflects quite high precision and high efficiency, which is in terms of material cut by hand phase, and is not a concept with the commonly referred machining accuracy and efficiency. 

That is, it is still the case even comparing the ten thousand RMB small CNC machine with the imported millions of large CNC, the accuracy, roughness and production efficiency of processing parts will not have a big difference.

Therefore, for this equipment which has completed only a rough processing due to the limitations of the process, it is not scientific spend costly to pursue to improve the machining accuracy and efficiency and so-called high-grade configuration as the machining center and other type excellent equipment. Not using the most expensive thing on the device, it will become high-end equipment. 

CNC cutting machine itself is rough processing, when customers are choosing, you should see whether your products’ requirements for accuracy is high or not, wire cutting accuracy is the highest, but the cutting machine speed is the slowest. For the cutting machine and power not known by some customers, what the cutters guarantee is cutting accuracy and the power ensures cutting thickness, tilt, burrs and slag, so you only need to think whether the accuracy you want is high and how high it is? And the largest steel cutting length and width for the metal materials, and then the products will be what you need.