Banding machine general processing principles

  Banding machine also named binding machine, can wrap straps around the product or packaging, then tighten and connect both ends of the machine, through the thermal effect of melting or the usage of material covered buttons. The banding machine (binding machine)’s function is let plastic tape close to the surface of the bandage packages, so that package not be scattered and fell into pieces in the transportation, meanwhile keep appearance neat when bundled.

Classified according to different criteria with banding machine (binding machine):

Classified by mechanism: unmanned baler, automatic horizontal baler, automatic wear the sword baler, automatic pressure wear a sword-type baler, automatic pressurized baler, portable baler .

Classified by Use: waste paper baler, metal baler, straw baler, cotton baler, plastic baler

Classified according to the performance: automatic balers, semi-automatic balers, manual baler 

For semi-automatic balers, processing is plastic tape on the disc, then the pre-tape feeder leading into the storage tape cartridge, to orbit by sending pulley. Start banding action in turn according to the following program automatically automatic balers program.

1. Retreat with belt tensioning

      Rose a chuck grip plastic to take the lead, sent pulley reversal retires with the excess plastic band returned to the storage cassette and tightens tied objects. Subsequently, the robots to grip the plastic with further tighten the package to the tune tightness.

      2. Cut with a bonding

      Exit guide plate from the middle of the two layers of plastic tape, scald head synchronization inserted between two layers with, then the two chucks increased grip the plastic with the other end to take the lead, cut tape cutter, and will take the lead in pushing the hot head contact with the , heat melting (surface), then perm head quickly exit cutter continues to rise to the surface with two layers of plastic melting pressure in pressure board, and cooling and solidification, two with adhesive (YKM-WY machine does not have a hot head, The starting friction completed adhesive).

      3. Take off package

      Bearing plate to exit the plastic strapping good with a circle, each chuck reset, complete the banding.

      4. Conveyor belt

      Sent pulley forward plastic tape storage cassette into orbit, ready for the next banding.

      5. Uninstall

      The above is a single channel, the process of banding machine into the return belt tensioning procedure when the machine is in interlocking state. Directly after the conveyor belt is completed carried out by the program cycle continuously.