Bench lathe remanufacturing revealed huge potential

As an emerging industry, green remanufacture engineering is a type of recycle suitable for ecological and economical requirements. Remanufacturing is not the same as refurbishing a product, which merely replaces the degraded parts.

Rather, it’s like “bringing the odometer back to zero,” Nasr explains. In reman, a product is completely disassembled, with as many components as possible—ideally all of them—salvaged and cleaned to a good-as-new state. The newly enhanced parts are then reassembled into a born-again product. For lots of goods, it’s a process that can be repeated many times over.Remanufacturing represents perhaps the largest untapped resource for productivity improvement in American industry.

By using waste machine recycling in good casting, bench lathe can be sent back to the factory technical reform to make a roll, the operation accuracy and service life is as same as a new machine.

China is the world manufacturing power, is also machine power, the current domestic bench lathe has about 8 million, already for seven years the world consumption machine. According to the international on the attrition rate of 3% per year, nearly 240000 bench lathe into the selection procedure, accounting for half of the domestic production of the new machine around. 

If make full use of the waste of the bench lathe, column, such as casting, and carries on the repair transformation, can save 60% of energy consumption, save 70% of the costs, reduce the pollutant emissions 80% above, so as to realize the production cycle.

Make good choice for commercial air exchanger

Though Air exchanger is a negligible part for people’ daily life, but it brought the healthy and comfortable enjoy and become the good assistant of People's Daily life. So, how to choose the suitable one? Here is detail in the method of choosing and buying. Choose ventilation unit should be combined with equipment usage, technological requirements, occasions to determine the factors such as fan type, model and structure material, etc., making choice in line with their own best demand. The following eight summarizes hope to help you:

1) before making decision, you should understand the domestic in production and product quality, such as production in ventilator varieties, specifications and various products of special purpose, new product development and promotion. Besides, still should give full consideration to the requirements of environmental protection, in order to select the fan.

2) according to the different characters in physical, chemical of conveying gas, choose different air exchanger for usage. Such as delivery exploded air should elect anti-exposure air exchanger. Dust or conveying of pulverized coal should choose dust or pulverized coal. Transport corrosive gas should choose anti-corrosion ventilator. In high temperature occasion work or conveying high temperature gas should choose high temperature, etc.

3) If there are two more ventilators available, it should give priority to higher efficient one, the adjusting range larger, of course, should also be compared, weigh the pros and cons and then  decided.

4) if the selected fan impeller diameter than original fan impeller diameter partial big many, in order to use the original motor shaft, bearing and the bearing, etc., have to motor start time, fan original parts of strength and shaft critical speed of accounting.

5) choose centrifugal air unit, when the motor power with less than or equal to 75 kw, not only have to start with the valve. When the row send high temperature flue gas or air and choose centrifugal boiler induced draft fan, should establish starter valve to prevent cold caused by overload running.

6) erase requirements of the ventilation system, should be first selection efficiency is high, the impeller rotational speed is low, and the change of it in the highest efficiency point work. It Still should according to the ventilation system of the noise and vibration mode of transmission, adopt corresponding noise elimination and vibration reduction measures. In qi and motor vibration reduction measures, general can use damping foundation, such as spring shock absorber or rubber shock absorber, etc.

  

Air exchanger should consider making full use of the original equipment, suitable for the manufacture, installation and safety running etc.

Air exchanger help you healthly pass the cold winter

The most effective way to reduce the indoor air pollution, improve the indoor air quality is improving the indoor air circulation. For A ventilated window, air flow direction is blind, chaotic flow may bring the peculiar smell of the toilet and kitchen into the sitting room and bedroom, and entrain dust, affecting indoor clean and health. At the same time also it is unable to avoid noise pollution. The other way-making use of cold and heat source facilities will cause energy waste which in the energy-saving modern society is obviously not advisable.

So the air exchanger start from the quantity, suck up the outdoor air into the interior, indoor air discharge outdoor which belongs to the open loop system. In order to keep the room clean and temperature change, so also contains air filtration unit and heat exchange device in the air exchanger. Through the heat recovery unit, fresh air temperature was adjusted to basic consistent with indoor temperature. Letting indoor environment comfortable, healthy, effectively improve the indoor residential environment.

The substantive function of air exchanger is letting indoor air pollution and harmful gas emissions out, and at the same time, added in plenty of fresh air. Harmful gas mainly includes the following four categories: physical pollution dust class, chemical pollution gas class, biological pollution, anaerobic bacterial pollution draft class. Just speaking to the north spring for climate in physics, chemistry class is most serious pollution. Its biggest advantage is that the use of heat exchanger and air filter. Through the air filter effective treatment, such as dust, smoke particles, the tail gas will be filtered in a wide range. Under the condition of doors and Windows enclosed, realize the 24 hours of recycle of fresh air.

Precision Glass Cutter vs Semi-auto glass cutting machine vs automatic shaped glass cutting

This precision cutter machine is suitable for mass cutting square and rectangle sheet glass.

Adjust the space of cutter rack according to the requirement of cutting accuracy, then push the horizontal and vertical bridge to begin mass cutting.
High efficiency and easy operation to cut with multi-cutter and the cutting box can increase accordingly. Glass Cutter machine is self-lubricating, and easy to change the cutter wheel. Possess of high accuracy, long using life and attractive appearance.

Semi-auto glass cutting machine could cut glassed with high efficiency and precision. Only cut straight line

Semi-auto glass cutting machine is used to cut glasses into small pieces. The machine could only cut straight line, is very much suitable for those who cut architecture glasses. Their dual-bridge structures ensure the high accuracy and high efficiency.

This automatic NC-shaped glass cutting machine cut out any shape of glass with professional graphs soft.

Use the international brands Servo motor, Cutting beam was imported from German rack and rail with high precision. Automatic cutting, with all the cutting data fully computer controlled. The operator can edit the glass size for cutting with computer. It can optimize the cutting size, and give out the data for processing, driven the machine to cut glass sheet automatically in high speed and high precision.

Customer’s requirement, equipped with computer or touch screen to operate the machine. It is simple to input parameters and have high speed and precision.

It can cut a sheet of glass into many different cutting areas. Tabletop can be chosen. The function of blowing and suction can be exchange. Cutting Type: Straight or Shaped cutting.

Organic glass laser cutting machine

NC series laser engraving machine have very excellent performance of engraving and cutting.  It is applicable for various industries such as furniture processing, material processing and so on. This type of Laser machine’s blocking design make it easy to install and adjust. the machine frame in reasonable, the materials can put into from the front and behind, it can Exhaust the smoke on the above and below of the laser machine, it use offline control system, English LCD, USB interface, support CAD and CorelDraw output directly.

Product Features: Laser tube: 80w. Software: lasercut5.3, support output from Art Cut, CorelDraw, Photoshop, AutoCAD directly. Honeycomb table for fabric, leather, engraving and cutting.

Aluminum strip working table for acrylic, wood cutting.

Performance:

The “front" and “back" of our laser machine can be open, suitable for super-length material process. Exclusive no water warning and automatic protection system, to protect the working life of laser tube effectively. The power control system has exclusive automatic protection equipment to ensure the stability and safety of the machine to the best. LCD control panel in English, convenience of operation control. Import liner bearing with high engraving precision. Offline control system which can not only work without computer, but also connect to U disk, USB communication. Imported metal mirrors, with good ability of reflection and focusing, long working life. Red dot position system realizes the exact position without laser.